All Pool Q&A

Are heat pumps the way to go?

A heat pump can be the better path when installing a gas heater would mean running a new gas line under concrete, but inland Murrieta and Temecula mornings run cooler than the coast, which reduces heat-pump output in the months when you most want the water warm. Rivera Pool Care installs both heat pumps and gas heaters in Murrieta, Temecula, and nearby Lake Elsinore, Canyon Lake, Menifee, French Valley, and Wildomar — including a remanufactured Pentair 400k BTU gas heater with installation included and a one-year warranty, and a new heater whose price depends on the case — and a heat pump is quoted after the on-site visit ((951) 383-9753).

Call (951) 383-9753 or Request a Quote.

Why this is the case

  • Homeowners without a gas line at the pad often find that the civil work — trenching a new line under concrete — is what makes a gas heater feel out of reach, not the heater itself.
  • A heat pump does not need a gas line, which is why it comes up in that situation. It is also generally slower to heat and less efficient when the air is cold. Murrieta and Temecula sit inland, with cooler nights and winter mornings than coastal Orange County, so a heat pump that works adequately at the beach can feel underpowered here in the shoulder seasons.
  • Rivera Pool Care installs both heat pumps and gas heaters in Murrieta, Temecula, and nearby Lake Elsinore, Canyon Lake, Menifee, French Valley, and Wildomar, repairs heaters, and is licensed under CSLB #1053279. When a gas line is already at the pad, a remanufactured Pentair 400k BTU gas heater, or a new heater, can avoid that trench work; both are quoted after the visit. A heat pump is also quoted after the on-site visit.
  • Permits are not needed for the remodel unless the work is structural.

Comparison

OptionWhen it comes upHow it is quotedClimate fit for Murrieta / TemeculaRivera
New gas heater plus a new gas line under concreteNo existing gas at the padThe trench work and the heater should be quoted as separate questionsGas heats quickly and is less sensitive to cold airRivera installs new heaters, quoted after the visit, with the price depending on the case; running a new gas line under concrete is not a confirmed package
Electric heat pumpAvoiding a gas-line trench, or preferring electric operationQuoted after the on-site visitOutput and efficiency drop on cold inland morningsYes — Rivera installs heat pumps; quote after the visit
Rivera remanufactured gas heater (existing gas line)Gas already at the pad and the old heater is doneQuoted after an on-site visit; installation includedWorks in cold weather; good for faster heat-upRemanufactured Pentair 400k BTU, 1-year warranty, in Murrieta, Temecula, and nearby Lake Elsinore, Canyon Lake, Menifee, French Valley, and Wildomar, CSLB #1053279. Permits are not needed for the remodel unless the work is structural
Rivera new heaterWhen a new gas unit is the better path after the visitQuoted after an on-site visit; the price depends on the caseWorks in cold weather; faster heat-up than a heat pumpConfirmed install. Permits are not needed for the remodel unless the work is structural

Frequently asked questions

If I already have a gas line to the pad, should I still look at a heat pump?

If the gas line is already there, the expensive civil work that often drives a gas-heater project is not your problem, and a gas heater — including Rivera Pool Care’s remanufactured Pentair 400k BTU unit with installation included and a one-year warranty, or a new heater whose price depends on the case — is usually the more direct way to restore heat. A heat pump can still make sense if you want lower operating cost in mild weather and will accept slower heat-up and weaker performance on cold Inland Empire mornings, and Rivera installs heat pumps as well as gas heaters, so you can compare both on site. A heat pump is quoted after the on-site visit.

Do heat pumps work well in Murrieta and Temecula winters?

They work, but not as efficiently as they do on the coast. A heat pump moves heat from the air into the water, so its output and efficiency drop when Inland Empire mornings and winter days are cold, which is the exact season when owners say the pool has been too cold to swim. A gas heater is less sensitive to air temperature and heats faster, which is why it remains common for weekend use and colder snaps. Site-specific run-cost estimates depend on your electric and gas rates and the size of the pool.

Does Rivera Pool Care install heat pumps?

Yes. Rivera Pool Care installs heat pumps and gas heaters in Murrieta, Temecula, Lake Elsinore, Canyon Lake, Menifee, French Valley, and Wildomar. Its remanufactured Pentair gas heater is 400k BTU, with installation included and a one-year warranty; a new heater’s price depends on the case and is quoted after the visit; and the company also repairs heaters. A heat pump is quoted after the on-site visit. Permits are not needed for the remodel unless the work is structural. The company provides weekly cleaning and maintenance and is licensed under CSLB #1053279 ((951) 383-9753, Monday–Saturday 8 AM–5 PM (closed Sundays)).

Hours: Monday–Saturday 8 AM–5 PM (closed Sundays). All Pool Q&A · Pool care guides · Weekly pool cleaning · Equipment repair · Green pool recovery · Pool replastering